Serving the McAllen area  ·  (956) 348-0421  ·  Open Mon-Sun 7am-7pm
📞 (956) 348-0421 Free Quote

Metal Roofing in Alamo, TX (78516) · Local Professionals

McAllen Metal Roofing · Fast response in Alamo and the McAllen area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+353Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Alamo is a small, tight-knit community right on the edge of the Rio Grande Valley, where the mix of older ranch homes, mobile-home parks, and working farms means metal roofs are everywhere. If you live near the Alamo Flea Market or along Business 83, you know the summer sun and spring storms can punish a roof.

That's why homeowners in ZIP 78516 call McAllen Metal Roofing. We're just up the road in McAllen, and we've spent years working on the metal roofs that define this part of Hidalgo County. From re-screwing panels on an RV carport to replacing a storm-damaged roof on a farmhouse, we know the local conditions because we live here too.

Metal Roofing in Alamo (78516)

Alamo sits on flat delta land, and that means water has nowhere to go after a heavy rain. We see a lot of standing water around foundations and in low spots, so proper flashing and drainage are critical. The housing stock here ranges from older homes with corrugated panels to newer builds with standing seam, plus a lot of mobile homes and RV parks where re-fastening and coating are common. The intense sun and occasional hail take a toll on fasteners and sealants, and wind from Gulf storms can lift panels if they aren't secured properly.

Our team has worked on everything from small carports to large agricultural buildings. We understand the local building department requirements and can help you navigate permits. If you're unsure about local rules, the City of Alamo website (https://www.hidalgocounty.us) is a good starting point, but always verify directly with the building department.

Our services in Alamo

How a Job Works in Alamo

Step 1: Call us at (956) 348-0421 or fill out our contact form. We'll schedule a free on-site assessment at your property in Alamo. We'll inspect your roof, discuss your options, and provide a written estimate.

Step 2: Once you approve, we'll pull any necessary permits and schedule the work. Our crews are experienced with the tight access in some Alamo neighborhoods and know how to work around HOA rules if applicable. We'll keep you informed throughout the process.

Step 3: After the job is done, we clean up thoroughly and walk the property with you to make sure you're satisfied. We don't leave until you're happy.

Metal roofing in Alamo is priced by the square foot, and typical jobs range from about $5.50 per square foot for corrugated panels to $20 or more for copper. A standard metal roof installation starts around $8 per square foot, while a full replacement is about $9. Repair jobs like leak fixes start at $450, and screw replacement starts at $750. Factors like roof size, pitch, access, and the condition of your existing roof affect the final price. Call us at (956) 348-0421 for a free estimate tailored to your property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Alamo and nearby areas.

My mobile home in Alamo has metal panels that are loose after last year's storms. Can you re-screw them?
Yes. We handle screw replacement and re-fastening for mobile homes and RV parks all over Alamo. We use proper fasteners and sealants to secure panels and prevent leaks. Call us to schedule an inspection.
How quickly can you respond to storm damage in Alamo?
We offer free inspections for storm and wind damage and prioritize emergency repairs. Call (956) 348-0421 and we'll get someone out as soon as possible.
What's the average cost to replace a metal roof on a typical Alamo home?
Most homeowners in Alamo spend between $9 and $12 per square foot for a replacement, depending on the material and complexity. We provide free estimates so you know exactly what to expect.
Do I need a permit for a metal roof replacement in Alamo?
Permits are generally required for roof replacements, but requirements vary. We recommend checking with the City of Alamo or Hidalgo County building department. We can help guide you through the process.
My neighbor's tree branches hang over my roof. What can I do about property lines and HOA rules?
Property line issues are civil matters, but we can trim branches that overhang your roof during installation if they interfere. For HOA rules, check your covenants or contact your HOA board. We can coordinate with them if needed.
Are you insured for work on my Alamo property?
Yes, we are fully insured with general liability and workers' compensation coverage. We're happy to provide proof of insurance upon request.
How often should I have my metal roof inspected in Alamo?
We recommend an inspection every two to three years, especially after major storms. The intense sun and occasional hail can loosen fasteners and wear sealants. Regular maintenance can extend the life of your roof.
Why choose us?

Trusted professionals in McAllen

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in McAllen

All your work handled by qualified professionals in McAllen

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

353+ Verified Client Reviews in McAllen

⭐⭐⭐⭐⭐ 4.9/5 · 353 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in McAllen · Response within 24h · No commitment · ☎ (956) 348-0421

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in McAllen ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm