Serving the McAllen area  ·  (956) 348-0421  ·  Open Mon-Sun 7am-7pm
📞 (956) 348-0421 Free Quote

Metal Roofing in Pharr, TX (78577) · Local Professionals

McAllen Metal Roofing · Fast response in Pharr and the McAllen area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+353Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Pharr is a city of brick ranches and citrus groves, where the flat Rio Grande Valley stretches out under a subtropical sun and the afternoon heat can cook the shingles right off a roof. The neighborhoods around Downtown Pharr and along Cage Boulevard are full of post-war brick homes with low-pitch roofs that have taken a beating from hail, wind, and the occasional hurricane. If your shingles are pocked, curling, or leaking into the attic, you are not alone.

Homeowners in Pharr (78577) call McAllen Metal Roofing because we know the local housing stock and the weather that hits it. From the brick ranches near Pharr-San Juan-Alamo High School to the newer stucco homes off Expressway 281, we have seen what hail seasons and Gulf storms do to a roof. We offer free inspections and honest answers, not pushy sales talk.

Metal Roofing in Pharr (78577)

Pharr sits on the flat delta of the Rio Grande, where the soil is mostly clay and the water table is high. That means drainage matters, and roof runoff can pool near foundations if gutters are not sized right. Most homes here are single-story brick ranches built between the 1950s and 1980s, with a few older Spanish Revival and Mission-style homes near the original downtown. The lots are typically 60 to 70 feet wide, so access can be tight when we are hauling panels and equipment. We plan deliveries and staging to keep your driveway and the street clear. The intense sun and heat mean that shingles age fast, and hail storms can knock granules loose and crack the mat. When we install a metal roof, we use fasteners and flashing rated for high wind, and we pay attention to the transition at the eaves and valleys, where leaks often start.

Our team has been serving Pharr and the surrounding McAllen area for years. We are a Metal Roofing Alliance Member, and we are fully insured with general liability and workers' compensation. Whether you need a full replacement or a retrofit over existing shingles, we bring the same attention to detail.

Our services in Pharr

How a Job Works in Pharr

Step 1: You call us at (956) 348-0421 or request a free estimate online. We schedule a time to come out and inspect your roof, attic, and flashing. We look for hail damage, lifted panels, and signs of leaks. We also check the condition of your existing shingles if you are considering a retrofit. You get a written estimate with options, no pressure.

Step 2: Once you approve, we pull the required permits from the City of Pharr. Permit requirements vary, so we verify with the local building department before we start. We order materials and schedule the crew. On installation day, we protect your landscaping and set up a staging area. If your home is in an HOA, we coordinate color and profile approvals ahead of time. For tight lots, we use smaller delivery vehicles and plan the panel drops to avoid blocking neighbors.

Step 3: After the work is done, we clean up thoroughly. We magnet-sweep for nails and debris, and we walk the roof with you to show you the finished job. We do not leave until you are satisfied.

Pricing for metal roofing in Pharr depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and a retrofit over shingles at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. For a typical 1,500 square foot ranch, a basic corrugated panel roof might run $8,000 to $12,000, while standing seam could be $15,000 or more. We provide free estimates so you can see exact numbers for your home. Call (956) 348-0421 to schedule yours.

✅ Metal Roofing Alliance Member, licensed and insured for work in Pharr and nearby areas.

My brick ranch near Downtown Pharr has hail-beaten shingles. Can you install a metal roof over them?
Yes, if your existing shingles are in good enough condition and your roof structure can handle the added weight. We inspect the decking and shingles first. If there is any rot or damage, we recommend a full tear-off. Retrofit over shingles can save you money on disposal, but we follow local code limits on the number of layers. We will give you a clear recommendation after the free inspection.
A storm just blew through Pharr and lifted some panels on my roof. How fast can you respond?
We prioritize storm damage calls. Call us at (956) 348-0421 and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can tarp or secure the roof to prevent further water damage, and then provide a repair estimate. We also help document damage for your insurance claim, though coverage is always up to your insurer.
What does a metal roof cost for a typical Pharr home?
For a 1,500 to 2,000 square foot home, most metal roof installations run between $8,000 and $20,000. Corrugated or ribbed panel roofs start around $5.50 per square foot, while standing seam is $10 per square foot and up. Factors like roof pitch, number of penetrations, and material choice affect the final price. We give you a free estimate with a detailed breakdown.
Do I need a permit for a metal roof in Pharr?
Yes, roofing permits are commonly required for a full replacement or re-roof in Pharr, and requirements can vary. We handle the permit application and inspections for you. For specific rules and fees, check with the City of Pharr through the Hidalgo County website at https://www.hidalgocounty.us. We always verify current requirements with the local building department before starting work.
My HOA has rules about roof color. Can you help with approval?
Absolutely. We work with many HOAs in Pharr and the surrounding area. We can provide color samples and product specifications for your HOA board to review. If there are property line concerns, we can also coordinate with your neighbor and ensure the installation respects setbacks. Just let us know about any HOA or property line issues during the estimate.
Are you insured for work on my Pharr property?
Yes, we are fully insured. We carry general liability insurance and workers' compensation coverage for all our crew members. We can provide certificates of insurance upon request. You can have peace of mind knowing that your property and our workers are protected.
What maintenance does a metal roof need in Pharr's heat and hail?
Metal roofs are low maintenance, but in Pharr's climate, we recommend an annual inspection, especially after hail season or a major storm. Check for loose fasteners, debris in valleys, and any signs of rust or coating wear. We offer maintenance plans and can replace screws or apply a protective coating to extend the life of your roof. Call us to schedule a maintenance check.
Why choose us?

Trusted professionals in McAllen

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in McAllen

All your work handled by qualified professionals in McAllen

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

353+ Verified Client Reviews in McAllen

⭐⭐⭐⭐⭐ 4.9/5 · 353 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in McAllen · Response within 24h · No commitment · ☎ (956) 348-0421

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in McAllen ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm