Serving the McAllen area  ·  (956) 348-0421  ·  Open Mon-Sun 7am-7pm
📞 (956) 348-0421 Free Quote

Metal Roofing in Harlingen, TX (78550) · Local Professionals

McAllen Metal Roofing · Fast response in Harlingen and the McAllen area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+353Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Harlingen is a city of wide, tree-lined streets and practical homes built to handle the Gulf's mood swings. From the brick ranches near Pendleton Park to the newer stucco builds out toward the Harlingen Country Club, most roofs here have seen at least one major hurricane and a handful of hailstorms. The flat, low-lying ground means drainage and wind uplift matter as much as curb appeal.

When your roof starts showing its age or a storm peels back a panel, you want a crew that knows the difference between a quick patch and a proper retrofit. We're based in McAllen, just up the road, and we've worked on everything from 1950s bungalows off Harrison Avenue to metal carports in the RV parks along Business 77. Homeowners in Harlingen (78550) call us because we show up, explain the options in plain English, and stand behind the work.

Metal Roofing in Harlingen (78550)

Harlingen sits on the flat subtropical delta of the Rio Grande, and that shapes every roofing job we do here. The soil is mostly clay and sandy loam that shifts with our wet and dry cycles, so proper fastening and flashing details matter more than in hill country. Many homes are single-story brick or stucco ranches with low-slope roofs, and the summer sun is brutal enough to cook standard asphalt shingles in a decade. Add in hurricane season (Hanna in 2020 was a wake-up call for a lot of folks) and spring hailstorms, and you can see why metal is gaining ground. We also work on the older Spanish Revival and Mission-style homes near downtown, where the wrong panel profile can look out of place. And we handle the farmhouses, packing sheds, and barns out among the citrus groves and cane fields, where function usually beats fashion.

Our team has installed and repaired metal roofs across Harlingen and the surrounding Valley, from the neighborhoods around Valley International Airport to the mobile-home communities where carports and metal roofs are standard. We know the local building department's inspection rhythm and what the wind code requires for this area. If your property is in a historic district or under an HOA, we'll help you navigate the design review so you don't get stuck with a rejected color or panel style.

Our services in Harlingen

How a Job Works in Harlingen

Step 1: You call us at (956) 348-0421 or send a message, and we set up a free on-site assessment. We'll walk the roof, check the attic if accessible, and look at the flashing, fasteners, and seams. You'll get a written estimate with options, not a high-pressure sales pitch. We'll also flag any signs of storm damage that might be worth documenting for your insurance company (though coverage is always your carrier's call).

Step 2: Once you approve the scope, we pull the required permits through the City of Harlingen and schedule the work. Most full replacements take a few days depending on the size and complexity. Tight lots and steep pitches slow things down, and we plan for that. We protect your landscaping and keep the job site tidy. If we're doing a retrofit over existing shingles, we verify the layer count first because code limits how many layers you can leave in place.

Step 3: After the last panel goes down, we do a magnetic sweep for stray screws, clean the gutters, and walk the property with you. You'll see the finished roof, the flashing details, and the cleanup. We don't consider the job done until you're satisfied.

Pricing in Harlingen depends on the roof size, pitch, access, and the condition of the existing decking. As a ballpark, metal roof installation starts around $8 per square foot, standing seam runs from $10, and a full replacement from $9. If you're retrofitting over shingles, that starts at $7 per square foot, but we have to confirm the existing layers first. Repairs and leak fixes start at $450, and screw replacement or re-fastening starts at $750. Coating and painting can stretch the life of an older metal roof for about $2.50 per square foot. For a free estimate tailored to your Harlingen property, call (956) 348-0421.

✅ Metal Roofing Alliance Member, licensed and insured for work in Harlingen and nearby areas.

My house is near Pendleton Park and has a low-slope roof. Can you install standing seam without tearing everything off?
We can often do a retrofit over existing shingles if the decking is sound and the layer count is within code. On low-slope roofs, we pay extra attention to seam sealing and fastening patterns to handle ponding and wind uplift. We'll check the attic and decking during the free assessment before recommending a path.
A storm just peeled back some panels on my roof off Business 77. How fast can you get out there?
Call us at (956) 348-0421. We prioritize active leaks and storm damage. We'll schedule an inspection as soon as possible, usually within a day or two depending on the backlog, and we can often do temporary mitigation to prevent further water intrusion while you wait for repairs or an insurance decision.
What does a typical metal roof replacement cost for a 1,500-square-foot ranch house in Harlingen?
For a basic corrugated or ribbed panel roof, you might be in the $5.50 to $8 per square foot range installed, depending on tear-off, decking repairs, and trim. Standing seam or stone-coated steel runs higher, starting around $9 to $10 per square foot. We give you a firm number after we see the roof, not a phone guess.
Do I need a permit to replace my roof in Harlingen, and who handles it?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Harlingen, and the rules vary by jurisdiction. We pull the permit for you and coordinate the inspections. You can also check with the City of Harlingen website for general information on permits and local requirements.
My neighbor says my new metal roof will dump water on their property. How do you handle property line drainage?
We design the gutter and downspout layout to direct water away from the house and toward approved drainage areas, respecting property lines. If your HOA has rules about roof color or panel style, we'll help you get the design approved before we order materials. We also follow local setback and drainage ordinances.
Are you fully insured for work at my Harlingen home?
Yes. We carry general liability insurance and workers' compensation coverage for every crew member on your property. We're happy to provide certificates of insurance before we start.
What should I do to maintain my metal roof between hurricanes in Harlingen?
After storm season, check for loose fasteners and any debris that can trap moisture. Keep gutters clear, especially if you have oak or palm trees nearby. We recommend a professional inspection every couple of years, and we offer free estimates for any needed repairs. A coating can also extend the life of an older metal roof and improve energy efficiency.
Why choose us?

Trusted professionals in McAllen

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in McAllen

All your work handled by qualified professionals in McAllen

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

353+ Verified Client Reviews in McAllen

⭐⭐⭐⭐⭐ 4.9/5 · 353 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in McAllen · Response within 24h · No commitment · ☎ (956) 348-0421

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in McAllen ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm