Serving the McAllen area  ·  (956) 348-0421  ·  Open Mon-Sun 7am-7pm
📞 (956) 348-0421 Free Quote

Metal Roofing in Edinburg, TX (78539) · Local Professionals

McAllen Metal Roofing · Fast response in Edinburg and the McAllen area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+353Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Edinburg is growing fast, and the roofs here show it: 1990s and 2000s brick and stucco two-stories in neighborhoods off McColl Road and Trenton, older ranch homes near the Hidalgo County Courthouse, and mobile-home and RV communities where metal roofs and carports are already the norm. The flat delta ground and open sky mean sun, hail, and hurricane wind all hit the same roof, year after year.

Homeowners in 78539 call McAllen Metal Roofing because we know how metal actually performs in this climate. We are based in McAllen and work Edinburg daily, from the streets around the University of Texas Rio Grande Valley to the newer subdivisions out toward Monte Cristo Road. If your roof is leaking at a fastener, peeling at a seam, or just baking in the afternoon heat, we can take a look at no charge.

Metal Roofing in Edinburg (78539)

Edinburg sits on flat, low ground with heavy clay soils that hold water after a hard rain, so roof drainage and gutter sizing matter as much as the panels themselves. The housing stock ranges from small post-war ranch homes with shallow roof pitches to newer two-story Mediterranean-style houses with complex hips and valleys. Those valleys and penetrations are where leaks start, especially after spring hail dings the paint and wind lifts a panel edge. On the older homes near downtown, we often find multiple shingle layers and decking that needs attention before any retrofit. On the newer subdivisions, HOA rules and architectural review can limit panel profile and color, so we check that before we order material. Farm and packing-shed roofs out toward the citrus and cane fields take a different approach: heavier panels, exposed fasteners, and repairs built around equipment and access.

Our team has worked metal roofs across Hidalgo County for years, and we handle everything from a single leak call to a full standing-seam replacement. We are a Metal Roofing Alliance member and fully insured, with general liability and workers' compensation coverage.

Our services in Edinburg

How a Job Works in Edinburg

Step 1: You call (956) 348-0421 or send a request, and we schedule a free on-site assessment. We get on the roof, check the deck, fasteners, seams, and flashing, and take photos so you can see what we see. You get a written estimate with the scope and a clear price, not a range that changes later.

Step 2: Once you approve, we pull the required roofing permit through the City of Edinburg and schedule the work. Tight lots in older neighborhoods mean we plan material staging and dumpster placement in advance, and we coordinate with HOA review where it applies. Most residential re-roofs take a few days depending on size and weather.

Step 3: We clean the property daily and do a final walkthrough with you, checking gutters, magnetic sweeping for nails, and a review of the finished roof. We leave your yard and driveway the way we found them.

Pricing in Edinburg depends on square footage, roof pitch and complexity, how many layers are coming off, and whether the deck needs repair. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7, standard metal roof installation around $8, and standing seam around $10. Metal shingle and stone-coated steel run about $9, while copper and specialty metals start around $20. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, and flashing or skylight work at $600. We give free estimates, so call (956) 348-0421 and we will put real numbers on your roof instead of guesses.

✅ Metal Roofing Alliance Member, licensed and insured for work in Edinburg and nearby areas.

My house is near the University of Texas Rio Grande Valley and the roof is original from the 1990s. Is a retrofit over the shingles allowed in Edinburg?
Sometimes, but it depends on how many layers are already there and what the current code allows. We inspect the deck and existing layers first, then tell you whether a retrofit makes sense or whether a full tear-off is the safer call. We never recommend covering a roof that is already failing underneath.
A storm just peeled back panels on my carport and water is coming in. How fast can you get to Edinburg?
We treat active leaks and wind damage as priority calls. Call (956) 348-0421, describe the damage, and we will schedule the soonest available inspection, often same or next day depending on storm volume. We can tarp or make temporary repairs to stop water intrusion while the permanent fix is scheduled.
What does a typical metal roof replacement cost for a 2,000 square foot house in 78539?
Most homes that size land somewhere between the installation and standing seam rates, so roughly $8 to $10 per square foot for the roofing portion, plus any deck repair or tear-off. Complex rooflines, two stories, and HOA-required profiles can push it higher. We give a firm written estimate after seeing the roof.
Do I need a permit to replace my roof in Edinburg, and who handles it?
A full replacement or re-roof typically requires a roofing permit, and requirements can vary by jurisdiction. We handle the permit application and inspections as part of the job. For the current rules and fees, check the City of Edinburg website or call the building department directly before you start.
My HOA requires a specific roof color and my neighbor says my new panels cross the property line. What do I do?
HOA approval usually needs to happen before material is ordered, so we help you confirm the approved profile and color early. On property lines, the roof itself can overhang, but drainage and gutter discharge should not flow onto a neighbor's lot. We set gutters and downspouts to keep water on your property and can show you the setback before work begins.
Are you insured for work on my Edinburg property?
Yes. We carry general liability insurance and workers' compensation coverage, and we can provide proof of coverage before work starts. That protects you if anything gets damaged or someone gets hurt on the job.
What maintenance does a metal roof need in Edinburg's heat and hail?
Check fasteners and seams once a year, especially after spring hail or a named storm. Look for lifted panels, loose screws, and paint scuffs on ridges and valleys. Keep gutters clear of palm fronds and mesquite leaves, and wash off dust and pollen so the finish lasts. A coating refresh every several years helps on older panels.
Why choose us?

Trusted professionals in McAllen

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in McAllen

All your work handled by qualified professionals in McAllen

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

353+ Verified Client Reviews in McAllen

⭐⭐⭐⭐⭐ 4.9/5 · 353 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in McAllen · Response within 24h · No commitment · ☎ (956) 348-0421

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in McAllen ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm