Serving the McAllen area  ·  (956) 348-0421  ·  Open Mon-Sun 7am-7pm
📞 (956) 348-0421 Free Quote

Metal Roofing in Palmview, TX (78572) · Local Professionals

McAllen Metal Roofing · Fast response in Palmview and the McAllen area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+353Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Palmview runs on family neighborhoods and citrus history, with a mix of brick and stucco homes built from the 1990s through the 2020s and older farmhouses tucked near the fields off Mile 7 and La Homa Road. The flat delta ground and long, brutally hot summers here punish asphalt shingles fast, and newer subdivisions like those near Palmview High School are full of homes where a reflective metal roof can cut summer cooling bills.

When Palmview homeowners in 78572 call us, it is usually because a shingle roof is baking in the sun, a storm has lifted panels, or a leak is showing up at a fastener. McAllen Metal Roofing is based just up the road in McAllen, and we serve Palmview and the surrounding Rio Grande Valley with insured crews and Metal Roofing Alliance membership behind the work.

Metal Roofing in Palmview (78572)

Most Palmview properties sit on flat lots with tight side yards, which changes how we stage panels and where we park the trailer. The soil is heavy delta clay that holds water after a hard rain, so we watch drainage around the eaves and make sure downspouts move water away from the slab. Newer two-story homes in the subdivisions off Veterans Boulevard and La Homa Road often have steep roof pitches and HOA design rules that limit panel profile and color, while older homes near the original town center have lower slopes and sometimes multiple layers of shingles that have to be checked before a retrofit. The intense sun and spring hail are the two big stresses here, and we see failed fasteners and separated seams more than anything else.

Our team has worked roofs across Hidalgo County, from farmhouses and packing sheds to new stucco homes, and we bring that experience to every Palmview job. We are fully insured with general liability and workers' compensation, and we are a Metal Roofing Alliance member.

Our services in Palmview

How a Job Works in Palmview

Step 1: You call (956) 348-0421 or ask for a free estimate, and we set a time to walk the roof and the attic with you. We look at the deck, the flashing, the fasteners, and how water is draining, then give you a written scope and price before any work starts.

Step 2: We pull the roofing permit with the local building department and coordinate any HOA approval if your subdivision requires it. On tight Palmview lots we plan panel delivery and staging so we are not blocking your neighbor's driveway, and we protect landscaping and AC units before tear-off begins.

Step 3: When the work is done we magnet-sweep the yard, haul away old materials, and walk the finished roof with you so you can see the seams, flashing, and fasteners. We leave your property clean and leave you with the paperwork you need for your records.

Pricing in Palmview depends on the size and pitch of your roof, how many layers are coming off, access around the house, and whether it is a repair or a full replacement. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and coating or painting at $2.50 per square foot. Storm and wind damage inspections are free, and we document what we find so you can talk to your insurer. Call (956) 348-0421 for a free estimate on your Palmview property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Palmview and nearby areas.

My house is in one of the newer Palmview subdivisions near Palmview High School. Will a metal roof help with summer cooling costs?
Yes. A reflective metal roof with a light color or a cool-roof coating can lower attic heat gain compared with aged asphalt shingles, and in Palmview's long hot summers that often shows up on your electric bill. We can walk you through panel profiles and finishes that fit your HOA rules.
A storm just peeled back panels on my roof in Palmview. How fast can you get out?
Call (956) 348-0421 and we will schedule a free storm and wind damage inspection as soon as we can, usually within a day or two depending on how many calls are coming in after the same storm. We document the damage and can make temporary repairs to stop water intrusion while you work with your insurer.
What does a typical metal roof replacement cost for a 1,500 square foot home in Palmview?
For a home that size, a metal roof replacement often lands in the range of $13,000 to $18,000 depending on pitch, access, and whether we are removing one or two layers of shingles. Standing seam runs higher, and a retrofit over existing shingles can be lower. We give you an exact number after a free on-site measure.
Do I need a permit for a metal roof in Palmview, and where do I check the rules?
Roofing permits are commonly required for a full replacement or re-roof in Palmview and Hidalgo County, and thresholds and inspection requirements can vary. We pull the permit for you, and you can also check the City of Palmview website at https://www.hidalgocounty.us for local contact information and current requirements.
My neighbor and I share a fence line, and I am worried about panel overhang. How do you handle property lines in Palmview?
We keep panels and flashing inside your property line and follow local setback rules, and we talk with you about any overhang before we order material. If your subdivision has an HOA, we can coordinate the design review so the panel profile and color are approved before installation.
Are you fully insured for work on my Palmview property?
Yes. We carry general liability insurance and workers' compensation for our crews, and we can provide a certificate of insurance before work begins. That protects you and your property if anything goes wrong on the job.
What maintenance should I do on a metal roof in Palmview between seasons?
Check fasteners and sealant at penetrations and flashing once a year, especially after spring hail or a summer storm, and keep gutters clear of palm fronds and mesquite leaves. In Palmview the sun and wind do most of the wear, so a quick inspection before hurricane season and again in the fall goes a long way. We offer free estimates for inspections and repairs.
Why choose us?

Trusted professionals in McAllen

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in McAllen

All your work handled by qualified professionals in McAllen

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

353+ Verified Client Reviews in McAllen

⭐⭐⭐⭐⭐ 4.9/5 · 353 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in McAllen · Response within 24h · No commitment · ☎ (956) 348-0421

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in McAllen ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm