Serving the McAllen area  ·  (956) 348-0421  ·  Open Mon-Sun 7am-7pm
📞 (956) 348-0421 Free Quote

Metal Roofing in Donna, TX (78537) · Local Professionals

McAllen Metal Roofing · Fast response in Donna and the McAllen area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+353Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Donna is a small, proud town in Hidalgo County where most homes sit on generous lots along streets like Salinas Boulevard and Business 83, with a mix of mid-century ranch houses and newer brick builds that take a beating from the South Texas sun. If your roof is showing its age, you are probably tired of patching shingles and ready for something that lasts.

Homeowners in Donna (78537) call McAllen Metal Roofing because we understand how heat and storms test a roof here. From the older neighborhoods near the Donna Public Library to the growing subdivisions off FM 493, we have seen what works and what does not. Our team is based in McAllen and serves Donna and the surrounding areas, so we are never far away when you need us.

Metal Roofing in Donna (78537)

Donna sits on flat, low-lying ground where drainage can be slow after heavy rains, and the intense summer sun bakes roofs day after day. Many homes here have mature mesquite and citrus trees that drop limbs and shade parts of the roof, which can lead to uneven wear and trapped moisture. The soil is mostly clay and sand, which can shift slightly over time and affect how a roof settles. We account for all of this when we install or repair a metal roof, making sure fasteners are set properly and panels are secured to handle wind uplift during hurricane season.

Our experience serving Donna and the McAllen area means we know the local building department and what it takes to get a permit approved. We have worked on everything from small carports to full replacements on ranch-style homes, and we bring that knowledge to every job.

Our services in Donna

How a Job Works in Donna

Step 1: You call us at (956) 348-0421 or request a free on-site assessment. We will come out, inspect your current roof, discuss your options, and provide a written estimate. We will also help you understand what permits are needed and guide you through the process with the City of Donna website if you have questions about local rules.

Step 2: Once you approve the estimate, we schedule the work. Our crew arrives on time, protects your landscaping, and gets to work. If your home is in an HOA or historic district, we coordinate any necessary approvals. We also handle permit applications and inspections so you do not have to worry about the paperwork.

Step 3: After the job is done, we clean up thoroughly, haul away all debris, and walk the property with you to make sure you are satisfied. We do not leave until you are happy with the result.

Pricing for metal roofing in Donna depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot, but keep in mind that local code limits how many layers you can have. Repairs start at $450, and screw replacement or re-fastening starts at $750. We always provide a free estimate so you know exactly what to expect before we begin. Call (956) 348-0421 to schedule yours.

✅ Metal Roofing Alliance Member, licensed and insured for work in Donna and nearby areas.

My house is near the Donna Golf Course and has a lot of trees. Will a metal roof handle falling branches better than shingles?
Yes, metal roofing is much more resistant to impact from falling limbs than asphalt shingles. While a very heavy branch could still cause damage, metal panels typically dent or scratch rather than crack or puncture, and they are less likely to allow water intrusion. We can also recommend a thicker gauge or a textured finish that hides minor dents.
A storm just blew through Donna and lifted some panels on my roof. Can you help quickly?
We prioritize storm damage repairs and offer free inspections. Call us at (956) 348-0421, and we will get out as soon as possible to secure your roof and prevent further damage. We document everything for your insurance claim and handle the repair from start to finish.
What is the typical cost to replace a roof on a 1,500 square foot home in Donna?
For a 1,500 square foot home, a basic corrugated metal roof might start around $8,250 (at $5.50 per square foot), while a standing seam roof could be closer to $15,000. These are rough estimates. The actual price depends on roof pitch, number of penetrations, and whether any decking needs repair. We provide a free on-site estimate to give you an accurate number.
Do I need a permit to replace my roof in Donna, and how do I get one?
Yes, roofing permits are typically required for a full replacement or re-roof in Donna. The rules and fees vary, so it is best to check with the city directly. You can start at the City of Donna website for contact information and general guidance. We handle the permit application process for you and ensure all inspections are passed.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues onto their yard. What should I do?
We can adjust gutter placement and downspouts to direct water away from the property line. If you are in an HOA, we will also help you get approval for the roof style and color. It is always a good idea to discuss your plans with your neighbor beforehand to avoid any misunderstandings.
Are you insured for roofing work in Donna?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in the unlikely event of an accident. We are happy to provide proof of insurance upon request.
How often should I have my metal roof inspected in Donna?
We recommend an inspection every two to three years, and after any major storm. The intense sun and occasional hail can loosen fasteners or degrade sealants over time. A quick inspection can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in McAllen

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in McAllen

All your work handled by qualified professionals in McAllen

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

353+ Verified Client Reviews in McAllen

⭐⭐⭐⭐⭐ 4.9/5 · 353 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in McAllen · Response within 24h · No commitment · ☎ (956) 348-0421

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in McAllen ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm