Serving the McAllen area  ·  (956) 348-0421  ·  Open Mon-Sun 7am-7pm
📞 (956) 348-0421 Free Quote

Metal Roofing in Brownsville, TX (78520) · Local Professionals

McAllen Metal Roofing · Fast response in Brownsville and the McAllen area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+353Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Brownsville homes near the Gulf get tested every hurricane season, and the flat, low-lying neighborhoods off Boca Chica Boulevard and around the old downtown grid show it. From the Spanish Revival bungalows near the Historic District to the brick and stucco ranches out toward Los Fresnos, the housing stock here is a mix of 1920s character homes and post-war builds that have seen wind, hail, and flooding more than once.

We are McAllen Metal Roofing, based up the valley but working Brownsville jobs regularly because homeowners here need roofers who understand coastal wind uplift and fast-moving storm damage. When a squall line rolls in off the Gulf and you hear a panel rattling, our team is a phone call away at (956) 348-0421.

Metal Roofing in Brownsville (78520)

Brownsville sits on the delta flats where drainage is slow and the soil shifts with our wet and dry cycles. That matters for roof work because flashing details and fastener depth have to account for movement, not just the panel itself. Homes near the resacas and the low blocks off International Boulevard can hold water at the eaves longer after a storm, so we pay close attention to edge metal and gutter tie-ins. The older neighborhoods around the Mitte Cultural District have narrow lots and mature mesquite and ebony trees that drop limbs, which is one of the most common puncture and seam-split calls we get. Closer to the river, the wind exposure on two-story homes is real, and we spec screw patterns and panel gauges for that uplift pressure, not just for looks.

Our team has installed, repaired, and replaced metal roofs across the Rio Grande Valley, and we bring that same valley-wide experience to Brownsville. We are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and we treat every property like it is in our own backyard.

Our services in Brownsville

How a Job Works in Brownsville

Step 1: You call (956) 348-0421 or request a free estimate, and we schedule an on-site assessment. We walk the roof, check fasteners, seams, flashing, and attic-side evidence of leaks, and we give you a written scope with pricing before any work starts. No pressure, no surprise add-ons.

Step 2: Once you approve, we pull the required roofing permit with the local building department and coordinate any HOA or historic review if your home is in a designated district. On tight lots near downtown, we stage materials in the driveway or street per city rules and keep the crew moving so your yard is not a construction zone for weeks. For storm damage, we document everything for your insurance claim, though coverage decisions stay with your carrier.

Step 3: We clean up daily, magnet-sweep for screws and nails, and do a final walkthrough with you. We do not leave until you have seen the finished work and understand the warranty and maintenance basics.

Pricing in Brownsville depends on roof size, pitch, access, and condition. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7, standing seam around $10, and stone-coated steel or metal shingle around $9. Repairs and leak calls typically start at $450, screw replacement and re-fastening at $750, and flashing or skylight work at $600. Coating and painting can extend the life of an existing metal roof starting around $2.50 per square foot. Storm and wind damage inspections are free, and we give you a clear written estimate before work begins. Call (956) 348-0421 for a free estimate on your Brownsville property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Brownsville and nearby areas.

My house near the Mitte Cultural District has huge mesquite trees over the roof. Can metal roofing handle the limb drops better than shingles?
Yes, in most cases. Metal panels resist punctures better than asphalt shingles, and when a limb does hit, the damage is usually a dented panel or a bent edge rather than a torn shingle field. We inspect the seams and fasteners after any major limb drop and can replace individual panels without redoing the whole roof.
A storm just peeled back panels on my roof in Brownsville. How fast can you get out?
Call (956) 348-0421 and we will schedule the earliest available inspection, usually within a day or two depending on storm volume. We can tarp or secure the roof to prevent further water intrusion while we document the damage for your insurance claim and prepare a repair estimate.
What does a typical metal roof replacement cost for a 1,500 square foot ranch house in Brownsville?
For a ranch that size, a retrofit over existing shingles often lands in the range of $7 per square foot, while a full tear-off and standing seam install runs closer to $10 per square foot. Access, roof complexity, and panel choice move the number, so we give you an exact figure after a free on-site measurement.
Do I need a permit to replace my roof in Brownsville, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and requirements vary by jurisdiction. We handle the permit application and inspections as part of the job. You can check current local rules on Brownsville's official city site at https://www.brownsvilletx.gov or by calling the building department directly.
My HOA has rules about roof color and panel profile. Can you work with that?
Yes. We regularly coordinate with HOA architectural review committees and can provide color samples and panel profile specs for approval before ordering materials. If your home is in a historic district, we also check design review requirements early so there are no surprises mid-project.
Are you insured for work on my Brownsville property?
We are fully insured, carrying both general liability and workers' compensation coverage. We are happy to provide a certificate of insurance before work begins so you have it on file.
What maintenance should I do on a metal roof in Brownsville between hurricane seasons?
Check fasteners and seams each spring before storm season, clear debris from valleys and gutters, and look for lifted panels or loose screws after any high-wind event. A coating refresh every several years helps in our intense sun. We offer free inspections to catch small issues before they become leaks.
Why choose us?

Trusted professionals in McAllen

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in McAllen

All your work handled by qualified professionals in McAllen

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

353+ Verified Client Reviews in McAllen

⭐⭐⭐⭐⭐ 4.9/5 · 353 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in McAllen · Response within 24h · No commitment · ☎ (956) 348-0421

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in McAllen ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm